How Much to Charge for Pressure Washing Per Square Foot (Worked Out)
You are standing in front of a two-story house with a tape measure and a client asking “so, what’s it going to be?” You could quote what the last guy on the local Facebook group said he charges, but his truck, his speed and his costs are not yours. The reliable way to decide how much to charge for pressure washing per square foot is to build the rate from two numbers you control: what an hour of your time must earn, and how many square feet you actually clean in an hour.
This guide works through that calculation for siding, concrete, roofs and decks, sets a minimum charge, and prices a full house from measurements.
Every figure below is an example assumption, not a market average. Rates vary widely by region. Plug in your own.
Step 1: Work out what an hour must earn
Start with the cost of one working hour on site, then add profit. Example assumptions for a one-truck operator with a helper:
| Per working hour | Amount |
|---|---|
| Owner pay | $45 |
| Helper wage | $20 |
| Chemicals, fuel and equipment wear | $15 |
| Share of overhead (insurance, marketing, phone, truck payment) | $25 |
| Hourly cost floor | $105 |
| Plus 20% profit | $21 |
| Target hourly rate | $126 |
The overhead line is the one most people skip. To estimate it, add a year’s fixed costs and divide by the hours you realistically bill in a year, remembering that winter is slow in most climates.
Step 2: Time your production rate per surface
Your production rate is how many square feet you finish per hour on site, including moving ladders and hoses, not just trigger time. Time three or four real jobs per surface and average them. Example figures:
| Surface | Example production rate |
|---|---|
| House siding, soft wash | 700 sq ft / hour |
| Concrete with a surface cleaner | 800 sq ft / hour |
| Roof soft wash | 400 sq ft / hour |
| Wood deck | 450 sq ft / hour |
Step 3: Divide target by production
Price per square foot = target hourly rate ÷ square feet per hour
| Surface | Calculation | Price per sq ft |
|---|---|---|
| Siding | $126 ÷ 700 | $0.18 |
| Concrete | $126 ÷ 800 | $0.1575, round to $0.16 |
| Roof | $126 ÷ 400 | $0.315, round to $0.32 |
| Deck | $126 ÷ 450 | $0.28 |
Notice what this does. The roof rate is nearly double the siding rate, not because roofs are “premium” but because you clean them at half the speed (and with more risk and more chemical). If you priced every surface at one blended rate, your roof jobs would be paying you about $72 an hour while your siding jobs paid $126.
Check an existing rate the other way round
You can run the formula backwards to test a rate you already use: effective hourly = price per sq ft × sq ft per hour. Say you charge $0.15 for driveways but your timing shows you only clean 400 sq ft an hour because you use a wand instead of a surface cleaner. That is $0.15 × 400 = $60 an hour, less than half the $126 target. Either the rate goes up to about $0.32, or the surface cleaner pays for itself quickly.
Step 4: Set a minimum charge
Every visit carries fixed time no matter how small it is: driving, unloading, mixing chemicals, connecting water, packing up. Suppose that fixed time is 1.5 hours.
Minimum charge = target hourly × fixed hours = $126 × 1.5 = $189, round to $190
Now a small two-car driveway of 20 × 24 ft = 480 sq ft at $0.16 prices at $76.80. Without a minimum you would drive across town for less than an hour’s target pay. With one, you quote $190, or you offer the driveway as an add-on to a house wash where the setup time is already paid for.
Worked example: pricing a full house
Measurements (example two-story house):
- Footprint 40 × 30 ft, so perimeter 140 ft
- Wall height 18 ft: 140 × 18 = 2,520 sq ft
- Two gable ends, each 30 ft wide and 8 ft tall: 2 × (30 × 8 ÷ 2) = 240 sq ft
- Subtract large windows and the garage door: about 250 sq ft
- Siding to clean: 2,520 + 240 − 250 = 2,510 sq ft
- Driveway: 20 × 24 = 480 sq ft; front walk 4 × 30 = 120 sq ft; concrete total 600 sq ft
Price:
| Line | Qty | Rate | Total | Hours (qty ÷ production) |
|---|---|---|---|---|
| Siding soft wash | 2,510 sq ft | $0.18 | $451.80 | 3.6 |
| Concrete | 600 sq ft | $0.16 | $96.00 | 0.75 |
| Total | $547.80 | 4.35 |
Check: $547.80 ÷ 4.35 hours = $125.93 per hour, right on the $126 target. Because the job is well above the $190 minimum, the minimum does not apply. Add your trip charge if the property is outside your normal area.
Notice the concrete would have been $76.80 on its own visit; as part of this job it adds $96.00 for 45 minutes, because the setup time is already covered by the house wash. That is why bundling flatwork with house washes is so profitable.
Copy-ready rate calculator
Build this on one tab in Excel or Google Sheets:
- B1 Owner pay/hr, B2 Helper/hr, B3 Costs/hr, B4 Overhead/hr, B5 Profit %
- Target hourly (B6):
=SUM(B1:B4)*(1+B5) - Fixed hours per visit (B7), Minimum charge (B8):
=ROUND(B6*B7,-1) - Surface table: Surface | Sq ft per hour (column B) | Rate (column C)
- Rate:
=ROUND($B$6/B11,2) - Job check:
=MAX(MinCharge, SUMPRODUCT(Qty,Rate))and=JobTotal/SUM(Hours)
Put the rates to work
Rates on a calculator tab are a start. The Pressure Washing & Mobile Detailing Business Tracker holds them in a Service Menu priced per square foot, per linear foot or flat, with an estimated time for each service. The Quote Builder pulls those rates, adds your trip charge and markup from Settings, and returns the quote total and your effective rate per labor hour, so you see a weak quote before you send it.
For the rest of the system (job tracking, re-book reminders, expenses and profit) see the full pressure washing business spreadsheet guide.
Featured on ReadySheetGo
Pressure Washing & Mobile Detailing Business Tracker — $16.99
Service Menu by sq ft, linear ft or flat, a Quote Builder that shows effective $/labor hour, job tracking, client re-book dates and a profit dashboard. Works in Excel and Google Sheets.
General information only, not business, tax or legal advice. All rates and times are illustrative assumptions.
Frequently Asked Questions
How do I calculate my pressure washing price per square foot?
Decide what an hour of your time must bring in (owner pay, helper, chemicals, fuel, equipment wear, a share of overhead, plus profit), then time yourself to find how many square feet you clean per hour on that surface. Divide the hourly target by the production rate. For example, a $126 hourly target and 700 sq ft per hour on siding gives $126 / 700 = $0.18 per square foot.
Should driveways and house washing have the same price per square foot?
Usually not. You clean flat concrete with a surface cleaner at a different speed than you soft wash siding, and roofs and wood decks are slower and riskier again. Each surface needs its own rate, built from its own production speed, or the slow surfaces quietly subsidise the fast ones.
What is a minimum charge in pressure washing and how do I set one?
A minimum charge is the lowest price you will take for any visit, because every job carries fixed time for driving, setting up hoses and chemicals, and packing up. A simple way to set it is your hourly target multiplied by the fixed time, for example $126 x 1.5 hours = $189, rounded to $190. A small driveway that prices at $77 by the square foot is billed at the minimum instead.
Is per square foot pricing better than hourly for pressure washing?
Per square foot is easier to quote and easier for clients to accept, and it rewards you for getting faster. Hourly protects you on unpredictable work like heavy staining. Many operators quote per square foot with a minimum charge, then check every quote by dividing the total by the expected hours to make sure the effective hourly rate still clears their target.